Hello,

I have here two Windows CE 5.0 devices one with
cf2.0Sp1  Version:2.0.5238.00

and one with cf2.0Sp3  Version:2.0.7045.00


On the device with sp1 I have no Problems to debug and  set break points,
but as soon as i connect the sp3 device over usb and try to debug the same
projekt the breakpoints turn from a red dot to a yellow circel and i cant 
stop anymore
on the breakpoints. Transfering the exe and tracing still works, but no 
break points...

What do I have to do, to be abel to set breakpoints on the sp3 device?

Regards

Michael

I've seen this occasionally.  Resetting the device usually fixes it.


-- 

Chris Tacke, Embedded MVP
OpenNETCF Consulting
Managed Code in an Embedded World
www.OpenNETCF.com


"Michael Bckinghoff"  wrote in message 
news:OsdaXwX5HHA.600@TK2MSFTNGP05.phx.gbl...

> Hello,
>
> I have here two Windows CE 5.0 devices one with
> cf2.0Sp1  Version:2.0.5238.00
>
> and one with cf2.0Sp3  Version:2.0.7045.00
>
>
> On the device with sp1 I have no Problems to debug and  set break points,
> but as soon as i connect the sp3 device over usb and try to debug the same
> projekt the breakpoints turn from a red dot to a yellow circel and i cant 
> stop anymore
> on the breakpoints. Transfering the exe and tracing still works, but no 
> break points...
>
> What do I have to do, to be abel to set breakpoints on the sp3 device?
>
> Regards
>
> Michael
> 

I had to Install:

http://download.microsoft.com/download/5/4/d/54d714b7-4a22-4b63-9043-1168ab2127d2/NETCFSetupv2.msi



CF2.0SP2 on my Desktop PC. Now I can Debug CF2.0SP1 and CF2.0SP2 Devices!



Regards



Michael



"<ctacke/>" <ctacke[at]opennetcf[dot]com> schrieb im Newsbeitrag 
news:OU89SJY5HHA.1484@TK2MSFTNGP06.phx.gbl...

> I've seen this occasionally.  Resetting the device usually fixes it.
>
>
> -- 
>
> Chris Tacke, Embedded MVP
> OpenNETCF Consulting
> Managed Code in an Embedded World
> www.OpenNETCF.com
>
>
> "Michael Bckinghoff"  wrote in message 
> news:OsdaXwX5HHA.600@TK2MSFTNGP05.phx.gbl...
>> Hello,
>>
>> I have here two Windows CE 5.0 devices one with
>> cf2.0Sp1  Version:2.0.5238.00
>>
>> and one with cf2.0Sp3  Version:2.0.7045.00
>>
>>
>> On the device with sp1 I have no Problems to debug and  set break points,
>> but as soon as i connect the sp3 device over usb and try to debug the 
>> same
>> projekt the breakpoints turn from a red dot to a yellow circel and i cant 
>> stop anymore
>> on the breakpoints. Transfering the exe and tracing still works, but no 
>> break points...
>>
>> What do I have to do, to be abel to set breakpoints on the sp3 device?
>>
>> Regards
>>
>> Michael
>>
>
>